– ISO 9001 Certified Manufacturer
From single prototypes to full production runs — Manufyn delivers custom sheet metal fabrication with precision tolerances, fast lead times, and 40–60% cost savings over US, UK, and Australian suppliers.
NDA on Request English-Speaking Team5 day prototypes ISO 9001 certified
Quote
turnaround
Global clients
served
Countries
shipped to
What we do
Sheet metal fabrication is the process of cutting, bending, welding, and finishing flat metal sheets into functional components or assemblies. It covers everything from a single bracket to a full enclosure — made from aluminium, stainless steel, mild steel, copper, or titanium.
Manufyn’s sheet metal fabrication service handles the complete production cycle — from DFM review and drawing approval through to finished, surface-treated parts delivered to your door.
Capabilities at a glance
Fibre laser up to 12mm. Clean edges, no tooling cost.
From your drawing to delivery — a transparent, eight-step process with you informed at every stage.
Manufyn’s precision sheet metal fabrication covers all major industrial metals — from common structural grades through to high-specification alloys for aerospace and medical applications.
| Material | Common Grades | Thickness Range | Typical Applications | Best Process |
|---|---|---|---|---|
| Aluminium | 6061-T6, 5052-H32, 3003 | 0.5mm – 6mm | Enclosures, aerospace panels, electronics brackets | Laser cutting, bending |
| Stainless Steel | 304, 316, 316L, 430 | 0.5mm – 8mm | Food equipment, medical, marine, chemical | Laser, TIG welding |
| Mild Steel | DC01, S235, S275, S355 | 0.8mm – 12mm | Structural, HVAC ductwork, frames, chassis | Plasma, MIG welding |
| Galvanised Steel | DX51D, S250GD | 0.5mm – 3mm | HVAC, roofing, automotive body panels | Laser cutting, bending |
| Copper | C101, C110 | 0.5mm – 3mm | Electrical busbars, heat exchangers, roofing | Laser, TIG welding |
| Titanium | Grade 2, Grade 5 (Ti-6Al-4V) | 0.5mm – 4mm | Aerospace, medical implants, marine | Laser cutting, TIG |
| Brass | C260, C360 | 0.5mm – 3mm | Decorative, valves, electrical connectors | Laser cutting |
Manufyn fabricates sheet metal components for demanding applications across ten industry verticals — each with its own tolerance, certification, and material requirements.
Most sheet metal fabrication manufacturers in the US, UK, and Australia charge a local premium. Manufyn delivers the same ISO-certified precision from India — with 40–60% lower cost, English communication, and no minimum order.
Average fabrication cost index — same spec, different country
Indicative cost comparison. Savings vary by part complexity, material, and quantity. Based on customer-reported data across 500+ orders.
Manufyn ships precision sheet metal fabrication parts to clients across the US, UK, Australia, UAE, Canada, Singapore, and 30+ countries — via air freight in 3–7 days or sea freight in 15–25 days.
Full capability across all sheet metal processes. Tolerances maintained to ISO 2768 and drawing callouts.
What Do Clients Say About Manufyn?
Upload your STEP or DXF file and our engineering team will respond within 24 hours with a detailed, itemised quote.
+91-84840-32262 | info@manufyn.com
Serving clients in the US, UK, UAE, Australia, Canada, Germany & 40+ countries worldwide.
Answers to everything engineers and buyers ask before their first CNC machining order.
Manufyn works with aluminium (6061, 5052, 3003), stainless steel (304, 316, 316L, 430), mild steel (DC01, S235, S275, S355), galvanised steel, copper (C101, C110), brass, and titanium (Grade 2 and Grade 5). Thickness range is 0.5mm to 12mm depending on material and process. Need a specialist alloy not listed? Contact us — we source on request.
There is no minimum order quantity at Manufyn. We accept orders for a single prototype piece right through to large production runs of tens of thousands. Prototype pricing reflects setup cost, but we never impose an artificial MOQ — we want to help you validate your design before committing to volume.
We accept DXF, DWG, STEP (.stp / .step), IGES (.igs), SolidWorks (.sldprt / .sldasm), and PDF drawings with full GD&T callouts. For best results, supply a 2D DXF for flat patterns plus a STEP or IGES 3D model for bent parts. If you only have a sketch or PDF, our engineering team can help convert it at no extra charge.
Prototype lead times are 5–8 working days from drawing approval to dispatch. Small batch orders (10–100 pieces) run 8–12 working days. Production volumes (100+ pieces) are typically 12–18 working days. Lead times vary with part complexity, material availability, and finishing. We confirm an exact lead time with every quote — never estimate without reviewing the drawing.
Yes — every Manufyn quote includes a free DFM review. Our engineers check for issues that add cost or risk quality: bend radii too tight for material thickness, holes too close to bends, inconsistent gauge, or tolerances tighter than the process can reliably achieve. You receive a DFM report alongside your quote so issues are resolved before production begins — saving time and money.
Manufyn ships to 30+ countries. Primary markets: United States (air 4–6 days), United Kingdom (air 3–5 days), Australia (air 5–7 days), UAE (air 2–3 days), Canada (air 5–7 days), Singapore (air 2–3 days), Malaysia, and Germany. We offer air freight for urgent orders and sea freight for cost-sensitive volume shipments. DDP (Delivered Duty Paid) shipping is available on request.
Yes. Manufyn operates under ISO 9001 quality management certification. Every order goes through incoming material inspection, in-process checks, and final dimensional inspection against drawing. We provide First Article Inspection Reports (FAIR) on request, and material test certificates are available for all certified mill-sourced materials.
We take IP protection seriously. Before receiving any drawings or technical data, we sign a Non-Disclosure Agreement (NDA). Internally, drawing access is restricted to the production team working on your specific order. We never sub-contract tooling or share your design with third parties. Your files are stored securely and deleted upon request after order completion.
Manufyn offers a full range of surface finishes: powder coating (any RAL colour), Type II anodising and Type III hardcoat anodising for aluminium, zinc plating (clear, yellow, black), electroless nickel plating, brushed finish (Ra 0.4–1.6 µm), passivation for stainless steel, e-coat / KTL primer, and wet paint. Finish specifications and standards are confirmed at the quoting stage.
Absolutely. If you have a concept sketch, a reference sample, or even a rough description of what you need, send it to us. Our engineering team can create a working drawing, suggest the most cost-effective design, and produce a quote — all before any production begins. We regularly help customers move from concept to finished fabricated part in a single project cycle.
ISO-certified precision. No minimum order. Quote in 24 hours. Shipped worldwide.